Economy waste disposal (H60751E) 0.75hp 1ph

£ 1,728.00 exc V.A.T

Economy waste disposal unit

0.75hp Economy free standing waste disposal unit manufactured from 0.9/1.2mm thick stainless steel- satin polish finish.
Suitable for fitting between tabling and sinks and can be used for either plate waste or food preparation.
The motor is activated using the controls on the front panel. The unit is wired up for connection to a fused isolator (not supplied).
Unit is supported on four stainless steel legs each with adjustable feet.
Suitable for connecting to mains water supply as well as a tank fed supply.
Suitable for plate waste, left overs, vegetables and fruit, fish and chicken bones.
Dimensions: 500 x 600 x 850/900 mm

Technical specification:
Meals capacity: 400 per day
Nominal capacity: 200kg/hr
Motor voltages: 0.75hp 1phase, 0.55 kw, 240v 50hz
Motor control: Automatic reset and overload
Fuse rating: 240v 1phase 50hz 25amps
Full load current 5.6 amps
Water connection: Cold supply to 15mm pipe connector
Recommended flow rate 12 litres per min.
inlet pressure minimum of 0.3 bar
Waste connection: 38mm BSP outlet bend to waste
Motor: NEMA ULCSA

Economy waste disposal (H60751E) 0.75hp 1ph

Economy waste disposal unit

0.75hp Economy free standing waste disposal unit manufactured from 0.9/1.2mm thick stainless steel- satin polish finish.

Suitable for fitting between tabling and sinks and can be used for either plate waste or food preparation.

The motor is activated using the controls on the front panel. The unit is wired up for connection to a fused isolator (not supplied).

Unit is supported on four stainless steel legs each with adjustable feet.

Suitable for connecting to mains water supply as well as a tank fed supply.

Suitable for plate waste, left overs, vegetables and fruit, fish and chicken bones.

Dimensions: 500 x 600 x 850/900 mm