Janitorial unit G20050N
£ 636.00 exc V.A.T
Janitorial unit
-
A stainless steel wash basin and bucket sink combined together to form a janitorial unit.
-
Manufactured from 1.2mm thick stainless steel throughout except for end panels which are 1.5mm - satin polish finish.
-
The rear panel above the bucket sink to have a removable access panel to connect the water and waste pipework.
-
A monobloc mixer tap with swivel spout is fitted to the front right hand corner of the upper washbasin.
-
A service gap is provided behind the lower bucket sink to allow for the waste pipe from the wash basin.
-
The bucket sink is fitted with two side opening grids to allow access to the bowl.
-
The wash basin is fitted with a 32mm flush grated waste and the bucket sink with a 38mm domed grated waste.
-
Four square stainless steel legs are provided which are to be fitted to the base of the unit for support.
-
Although intended to be floor standing the janitoril unit can be fixed as part wall hung/floor standing by using only two of the front legs or alternatively can be fitted as a wall hung unit by using the joggle strip provided.
-
Overall size: 500 x 600 x 900 mm
-
Lower Bowl Size: 400 x 400 x 180 mm
-
Upper Bowl size: 360 x 272 x 135 mm
A stainless steel wash basin and bucket sink combined together to form a janitorial unit.
Manufactured from 1.2mm thick stainless steel throughout except for end panels which are 1.5mm - satin polish finish.
The rear panel above the bucket sink to have a removable access panel to connect the water and waste pipework.
A monobloc mixer tap with swivel spout is fitted to the front right hand corner of the upper washbasin.
A service gap is provided behind the lower bucket sink to allow for the waste pipe from the wash basin.
The bucket sink is fitted with two side opening grids to allow access to the bowl.
The wash basin is fitted with a 32mm flush grated waste and the bucket sink with a 38mm domed grated waste.
Four square stainless steel legs are provided which are to be fitted to the base of the unit for support.
Although intended to be floor standing the janitoril unit can be fixed as part wall hung/floor standing by using only two of the front legs or alternatively can be fitted as a wall hung unit by using the joggle strip provided.
Overall size: 500 x 600 x 900 mm
Lower Bowl Size: 400 x 400 x 180 mm
Upper Bowl size: 360 x 272 x 135 mm
Extras
